Latest List of Alligator Clip Patch Cords

 In Bracke News, Patch Cords

Patch cords and alligator clips available from Bracke Manufacturing come in various designs and are of the highest quality.

A patch cable or patch cord is an electrical or optical cable used to connect (“patch-in”) one electronic or optical device to another for signal routing. Devices of different types (e.g., a switch connected to a computer, or a switch to a router) are connected with patch cords. Patch cords are usually produced in many different colors so as to be easily distinguishable, and are relatively short, perhaps no longer than two meters.

Patch cords can be as short as 3 inches (ca. 8 cm), to connect stacked components or route signals through a patch bay, or as long as twenty feet (ca. 6 m) or more in length for snake cables. As length increases, the cables are usually thicker and/or made with more shielding, to prevent signal loss (attenuation) and the introduction of unwanted radio frequencies and hum (electromagnetic interference).

Patch cords are often made of coaxial cables, with the signal carried through a shielded core, and the electrical ground or earthed return connection carried through a wire mesh surrounding the core. Each end of the cable is attached to a connector so that the cord may be plugged in. Connector types may vary widely, particularly with adapting cables.

Alligator Clip Patch Cords

Recommended Posts
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.